location_on

Branch Locator

Over 100 Branches Nationwide

how_to_reg

TRADE & DIY

Open to the public

local_shipping

FREE DELIVERY

With orders over £100

description

GET A QUOTE

Click here to get a quote

SKU
PS230050

MI-FLEX 35Z-155-8 CLASS 1 316 GRADE DOUBLE SKIN MULTIFUEL FLEX FLUE LINER QUATRO-SS 155mm x 8m

£314.93
  • Type: Flexible Flue Liner
  • Diameter: 155mm (6 inch)
  • Length: 8 Mtr
  • Part No: 35Z-125-8
  • Grade: 316L
  • Approvals: HETAS
  • Manufacturer: MI Flues
  • Fuel: Multi-Fuel
Please enter your delivery postcode below so that we may verify that this item can be delivered to you
please wait
Description

155mm Class 1 (316 Grade) Flexible Flue Liner 8 Mtr Coil

Multi fuel flexible liner made from 316L grade stainless steel.

Application: A double skinned flexible flue liner suitable for relining within a masonary chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cure dry peat.

Construction: The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The flue liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

Approval: Flue liner is approved and listed by HETAS it is also CE approved.

Installation Checklist:

  1. Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
  2. Sweep your chimney
  3. Check your pot is in good condition, if you are not using a suspended cowl then remove the pot from the stack.

Installation:

  • Flue liner should always be fitted from the top
  • Make sure the arrows are pointing upwards
  • Secure a piece of string (at least the same length as the flue liner to the nose cone (order seperatley)
  • Now attach the nose cone onto the end of the flue liner, again making sure the arrows on the flue liner are pointing away from the nose cone in an upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
  • Pull the liner down the chimney using the string and at the same time have someone ate the top of the chimney feeding the flue liner down, once the flue liner is fitted remove the nose cone.

Maintenance: It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

  • Type: Flexible Flue Liner
  • Diameter: 155mm (6 inch)
  • Length: 8 Mtr
  • Part No: 35Z-125-8
  • Grade: 316L
  • Approvals: HETAS
  • Manufacturer: MI Flues
  • Fuel: Multi-Fuel
The difference between the 316 grade & 904 grade flue liner explained  
Delivery
Products marked as 'local deliver only' may be too big/bulky to ship nationwide and therefore are only available for delivery within certain postcodes that are local to a Huws Gray branch. Delivery will be made by your nearest Huws Gray branch. You can view a list of our Building Material Centres by clicking here.
Copyright © 2019 Huws Gray