Denbigh Timber Vertical Board Fence Panel 6 X 3 Apex Cap Vb6X3

Vertical Fence Panel

This Vertical fence panel is constructed with featheredge boards and is a robust and sturdy panel which is designed to last. This fencing panel has a water based treatment applied to it for a long lasting life. Manufactured from FSC‚© certified sawn timber. Corner off your garden in style with these high quality vertical fence panel constructed with featheredge boards.

• 6ft wide Overlap Fence Panel, constructed with overlapping vertical boards with battens fitted to the back of the panel for added stability
• The Vertical Fence panel is designed to be durable and robust, this is a popular panel providing excellent privacy and security for your garden.
• This panel has been dip treated with a water based treatment to provide protection against rot and fungal decay.
• This panel is strong and built to last

Specification:

Fitting Your Fence

• Wooden Posts - When fitting any sized fence to a 3" x 3" or 4" x 4" wooden post, the post must be 2ft longer than the required height of the fence to allow 2ft in the ground.
• Fence Spike & Wooden Post - (fence spikes for use in soil) if using fence spikes, the wooden post must be the same height as the rquired fence panel.
• Bolt Down Anchors and Posts - (bolt downs for use with concrete) when using bolt down anchor, the posts recommended should be the same height as the required fence panel.
• Concrete Post Without Gravel Board - Always order the post 2ft higher than the height of the required fence panel, (to allow 2ft of post into the ground)
• Concrete Post With Gravel Board - Add 1ft to the height of the fence required (gravel boards are usually 1ft high). The post will be an overall 2ft higher than the fence and the gravel board (to allow 2ft of post into the ground)

Keep your fencing in good condition by following these four simple steps: