Pavestone Slurry Primer 12.5Kg Tub 6251002

Installing Porcelain paving looks at first glance to be as simple as laying any other paving.

A key Characterisitc of Porcelain is an exeptionally low water absorption value, meaning that the paving tile will not draw moisture to the same degree as other paving materials. This is a great benefit when it come to the surface resisting staining and staying looking clean. However, this also means that porcelain paving will absors almost nothing from the bedding mortar and concenquently, without help, porcelaon will not form a strong sustainable bond to the mortar bed.‚ 

Priming Slurry is designed to faciliatate the strong bonding of non-pourous / low pourous, porcelain and natural stone paving. To create the strong, sustainable bond required, brush primer slurry on the underside of each pabing tile/slab just prior to laying. It's easy to apply and does not add excessive cost to the insullation.‚ 

Slurry Primer is not just for porcelain. Pavestone strongly recommends using it to prime natural stone paving flags, just prior to laying, as it will Significantly reduce the potential for "picture frame" stains and patches from cement in the base mortar being drawn up through to the face of the stone.‚ 

A polymer modified, cement based, slurry primer, specifically designed to meet the recommended performace characteristics of BS7533. Manufactured from a controlled blend of specially selected aggragates, cements, and synthetic polymers and only requires the addition of water to produce a high quality priming slurry for use to improve bond strengths of porcelain paving, natural stone setts and cobbles, plags, concrete and clay pavers.‚ 

Packaging: 12.5kg Multi-use plastic bucket.‚ 

Coverage

Approximately 15m2 per 12.5kg tub.